Page 23
SAFETY PRECAUTIONS
Be sure to observe
WARNING
M08E
ONLY THE PERSON IN CHARGE OF
MAINTENANCE MUST REPAIR OR
ADJUST THE MACHINE.
The machine may be incorrectly repaired or ad-
justed, resulting in malfunction.
Have the machine repaired or adjusted by a
trained professional maintenance engineer.
Consult the manufacturer for training.
DO NOT PLACE YOUR HANDS OR
BODY INSIDE ACTIVE PART OF THE
MACHINE WHEN IT IS IN A SINGLE
STOP OR CYCLE STOP CONDITION.
The machine has been stopped only temporarily.
You may be injured if the sensors are actuated and
the machine moves unexpectedly.
Turn OFF the servo switch before placing your
hands or body inside the active part.
M34EB
M02E
BEFORE INSPECTING PNEUMATIC
EQUIPMENTS, CUT OFF THE AIR
SUPPLY AND EXHAUST AIR FROM
THE EQUIPMENTS.
You will have serious injury if the residual pressure
actuates the machine.
Before inspecting pneumatic equipment, cut off
the air supply and exhaust the air from the
equipment.
Switch OFF the power.
M11E
DO NOT ALLOW ANY PERSON WHO
HAS NOT RECEIVED SPECIAL
TRAINING TO OPERATE THE MA-
CHINE.
The machine may be operated improperly and
injure you.
Either carry out training by yourself, or consult
the manufacturer.
M62EB
DO NOT TURN OFF THE SERVO
SWITCH DURING
OPERATION.
The machine may get out of control and injure you.
Before turning OFF the servo switch, bring the
machine to a temporary stop state, such as a
single stop state and a cycle stop state or an
operation stop state.
M63E
DO NOT MOVE ANY AXES (INCLUD-
ING HEADS) MANUALLY WHILE
TURNING OFF AND THEN ON THE
SERVO SWITCH UNDER A SINGLE
STOP, CYCLE STOP OR MACHINE
ADJUSTMENT MENU.
The machine may be actuated suddenly and injure
you when the servo switch is turned on.
If any axes (or the heads) are moved, press the
emergency stop button, and then reset the
switch. Restart operation through the main
menu.
493C-E-MMA00-A03-00
Summary of Contents for KXF-493C
Page 2: ......
