Panasonic KX-UT123, Administrator'S Manual

Page: 191 / 312

Description Specifies the maximum period, in seconds, that STUN Binding
Requests must be sent by the CPE for the purpose of maintaining the
binding in the Gateway. This applies specifically to Binding Requests
sent from the UDP Connection Request address and port.
Note
•
This setting is available only when
"
ANNEX_G_STUN_ENABLE
" is set to "
Y
".
Value Range 1–3600
Default Value 300
ANNEX_G_STUN_MIN_KEEP_ALIVE
Value Format Integer
Description Specifies the minimum period, in seconds, that STUN Binding
Requests can be sent by the CPE for the purpose of maintaining the
binding in the Gateway. This limit applies only to Binding Requests sent
from the UDP Connection Request address and port, and only those
that do not contain the BINDING-CHANGE attribute.
Note
•
This setting is available only when
"
ANNEX_G_STUN_ENABLE
" is set to "
Y
".
Value Range 1–3600
Default Value 30
UDP_CON_REQ_ADDR_NOTIFY_LIMIT
Value Format Integer
Description Specifies the minimum time, in seconds, between Active Notifications
resulting from changes to the "UDPConnectionRequestAddress" (if
Active Notification is enabled).
Value Range 0–65535
Default Value 0
5.4 Network Settings
5.4.1 IP Settings
CONNECTION_TYPE
Value Format Integer
Document Version 2013-03 Administrator Guide 191
5.4.1 IP Settings