Panasonic KX-UT123, Administrator'S Manual

Page: 83 / 312

Value Range •
Auto Negotiation
•
100 Mbps/Full Duplex
•
100 Mbps/Half Duplex
•
10 Mbps/Full Duplex
•
10 Mbps/Half Duplex
Note
•
The KX-UT248 supports Gigabit Ethernet. When connecting to
a network that supports Gigabit Ethernet, select
[Auto
Negotiation] .
Default Value Auto Negotiation
4.3.2.2 LLDP Settings
Enable LLDP
Description Selects whether to enable or disable sending and receiving LLDP
frames.
Note
•
You should specify "
Yes
" for only one of "
LLDP
", "
VLAN
" or
"
IEEE8021X
".
•
If "
Yes
" is specified for two or more of the parameters above,
the settings are prioritized as follows: "
IEEE8021X
" > "
VLAN
"
> "
LLDP
". Therefore, if "
Yes
" is specified for both "
VLAN
" and
"
LLDP
", the VLAN-related settings are used.
Value Range •
Y
(Enable)
•
N
(Disable)
Default Value Y
Configuration File Reference LLDP_ENABLE (Page 204)
LLDP-MED Interval timer
Description Specifies the interval, in seconds, between sending each LLDP frame.
Value Range 1–3600
Default Value 30
Configuration File Reference LLDP_INTERVAL (Page 204)
IP Phone (VLAN ID)
Description Indicates the VLAN ID of the phone using LLDP (reference only).
Value Range 1–4094
Default Value Not applicable.
Document Version 2013-03 Administrator Guide 83
4.3.2 Ethernet Port Settings