Panasonic KX-UT123, Administrator'S Manual

Page: 47 / 312

23 20 50 61 6E 61 73 6F 6E 69 63 20 53 49 50 20
50 68 6F 6E 65 20 53 74 61 6E 64 61 72 64 20 46
6F 72 6D 61 74 20 46 69 6C 65 20 23
•
To prevent the designated character sequence being altered by chance, it is recommended that the
configuration file starts with the comment line shown below:
# Panasonic SIP Phone Standard Format File # DO NOT CHANGE THIS LINE!
•
Configuration files must end with an empty line.
•
Each parameter line is written in the form of XXX="yyy" (XXX: parameter name, yyy: parameter value).
The value must be enclosed by double quotation marks.
•
A parameter line written over multiple lines is not allowed. It will cause an error on the configuration file,
resulting in invalid provisioning.
Configuration Parameters
•
The unit supports multiple telephone lines. For some parameters, the value for each line must be specified
independently. A parameter name with the suffix "
_1
" is the parameter for line 1; "
_2
" for line 2, and so on.
Examples of setting the line (phone number) for accessing a voice mail server:
"
VM_NUMBER_1
": for line 1,
"
VM_NUMBER_2
": for line 2, …,
"
VM_NUMBER_6
": for line 6
Note
•
The number of lines available varies depending on the phone being used, as follows:
–
KX-UT113/KX-UT123: 1–2
–
KX-UT133/KX-UT136: 1–4
–
KX-UT248: 1–6
•
The maximum length of a parameter name is 32 characters.
•
The maximum length of a parameter value is 500 characters excluding double quotation marks.
•
No space characters are allowed in the line except when the value includes a space character(s).
Example:
DISPLAY_NAME_1="John Smith"
(valid)
DISPLAY_NAME_1 = "John Smith"
(invalid)
•
Some parameter values can be specified as "empty" to set the parameter values to empty.
Example:
NTP_ADDR=""
•
The parameters have no order.
•
If the same parameter is specified in a configuration file more than once, the value specified first is applied.
•
All configurable settings can be specified in the configuration file. You can ignore settings that already have
the desired values. Only change parameters as necessary.
2.5 Configuration File Examples
The following examples of configuration files are provided on the Panasonic Web site (
®
see Introduction ).
•
Simplified Example of the Configuration File
•
Comprehensive Example of the Configuration File
Document Version 2013-03 Administrator Guide 47
2.5 Configuration File Examples