manualshive.com logo in svg

Panasonic KX-TVP200E, Installation Instructions Manual

The Panasonic KX-TVP200E is an efficient and reliable communication system. Ensure smooth operation by downloading the free Subscriber's Manual from our website. This comprehensive manual provides step-by-step instructions and helpful tips, allowing you to make the most of your Panasonic KX-TVP200E.

Share
Download
background image

3-38          Features

M

3

Features and Services

S.M.

• “Message Scanning with Information” (page 5-8)

Subscriber

• Message Playback Options (Subscriber's Guide Page 2-3)

M

essage Transfer

Feature Ref.

Receive Message

Description

Allows the Subscriber to transfer a message left in his mailbox to other
mailboxes immediately after listening.
As destinations, one or more mailboxes can be specified.  It is possible to put
some comment to the top of the message.

More
Information

• Group Distribution List, System, Group Distribution List, Personal

You can transfer a message to several Subscribers with a single operation.

Conditions

• This feature is also available to the System Manager and the Message

Manager.

• Up to 20 mailboxes can be specified as destinations.
• Messages specified as private by the message sender cannot be transferred.
• Messages transferred to other mailboxes still remain in the Subscriber’s

mailbox until the Subscriber erases them himself; or until the “Saved Message
Retention Time” expires.

S.A.

• “Saved Message Retention Time” (page 4-28)

S.M.

• Listening to Messages (page 5-17)

M.M.

• Listening to Messages (page 6-5)

Subscriber

• Message Transfer (Subscriber's Guide page 2-6)

M

essage Waiting Notification – Device

Description

The VPS notifies the Subscriber that there are messages recorded in his
mailbox.  This feature eliminates the need to regularly check the mailbox.

The VPS calls a specified telephone or beeper.  If it is a telephone, the VPS
plays the message.  If it is a beeper, the caller’s callback number can be
displayed on its LCD.

Summary of Contents for KX-TVP200E























































































































































































































































































































































































































Reviews:

No comments

Related manuals for KX-TVP200E

Panasonic KX-TVS100E Subscriber'S Manual preview
KX-TVS100E
Brand: Panasonic Pages: 56
CenturyLink Polycom 4 Series Quick Start Manual preview
Polycom 4 Series
Brand: CenturyLink Pages: 2
AT&T MERLIN MAIL System Programming And Maintenance Manual preview
MERLIN MAIL
Brand: AT&T Pages: 224

Brands by name

Popular brands

Load more brands