W-0-4
Worksheets
f) External Stations ONLY (trunks)
YES / NO
Is CALLED party information (inband DTMF signaling)
passed?
YES / NO
Is CALLING party information (inband DTMF signaling)
passed?
YES / NO
Can the Switch provide Message Waiting Notification from
a Single Line set?
YES / NO
a) Turn ON any Message Waiting Indicator?
YES / NO
What is the “ON” sequence? _______________________________
b) Turn OFF any Message Waiting Indicator?
YES / NO
What is the “OFF” sequence? ______________________________
Type of Message Waiting Notification provided
YES / NO
a) Message Waiting Indication via (Digital Display)
YES / NO
b) Message Waiting Indication via (Lamp)
YES / NO
c) Message Waiting Indication via (Stutter dial tone)
YES / NO
When a station calls another (single line) station (station to station)
a) is CALLING party information (inband DTMF signaling) passed? YES / NO
b) is “speed dialing” supported by this switch?
YES / NO
c) can it be programmed to provide CALLING party into via
DTMF signaling?
YES / NO
If far end disconnect signaling supported?
YES / NO
a) Can the Switch provide “open loop current” when the far
end disconnects?
YES / NO
b) Can the Switch provide “silence” when the far end disconnects?
YES / NO
c) Can the Switch provide a “constant tone” when the far
end disconnects?
YES / NO
(i.e. dial-tone or equivalent ... a minimum of 10 seconds is required)
d) Can the Switch provide a DTMF sequence when the far
end disconnects?
YES / NO
if so, what is the sequence? ________________________________
