manualshive.com logo in svg

Panasonic KX-TVP200E, Installation Instructions Manual

The Panasonic KX-TVP200E is an efficient and reliable communication system. Ensure smooth operation by downloading the free Subscriber's Manual from our website. This comprehensive manual provides step-by-step instructions and helpful tips, allowing you to make the most of your Panasonic KX-TVP200E.

Share
Download
background image

3-12          Features

C

lass of Service

Description

Used to define a set of services available to the Subscriber.  Up to 64 different
types of Class of Service can be established by System Programming.
A Class of Service number can be assigned to each mailbox.

Conditions

• Class of Service No. 63 is used for the Message Manager and No. 64 is for

the System Manager.

S.A.

• “Class of Service Number” (page 4-21)
• Setting COS (Class of Service) Parameters (page 4-27)

S.M.

• Setting COS (Class of Service) Parameters (page 5-7)

C

ompany Greetings

Description

Used to greet incoming callers to the VPS.

The Company Greeting is assigned port-by-port and Day/Night basis by the
System Administrator.

If a company greeting is not recorded, the caller hears the following voice
prompt.

Good morning / Good afternoon / Good evening.
Welcome to the Voice Processing System.

Note:

You can record the above prompt in other languages.  Refer to "Recording
User Prompts" in Chapter 6.

Conditions

• A total of 32 different Company Greetings can be recorded by the Message

Manager.

S.A.

• Port Assignment “Company Greeting No.” (page 4-38)
• Holiday Setting “Company Greeting Number” (page 4-60)

M.M.

• Recording Company Greetings (page 6-12)

C

3

Features and Services

Summary of Contents for KX-TVP200E























































































































































































































































































































































































































Reviews:

No comments

Related manuals for KX-TVP200E

EZ ADVANTAGE EZ ANSWER User Manual preview
EZ ANSWER
Brand: EZ ADVANTAGE Pages: 52

Brands by name

Popular brands

Load more brands