manualshive.com logo in svg

Panasonic KX-TVP200E, Installation Instructions Manual

The Panasonic KX-TVP200E is an efficient and reliable communication system. Ensure smooth operation by downloading the free Subscriber's Manual from our website. This comprehensive manual provides step-by-step instructions and helpful tips, allowing you to make the most of your Panasonic KX-TVP200E.

Share
Download
background image

4-30    

  System Administrator

Value Range

(default)

4.5.2

Setting COS (Class of Service)

Parameters

Specifies the intercom paging group number
available to the Subscriber.
[Note]
This feature is available if D-PITS Voice Mail
Integration with a Panasonic KX-TD series
telephone system is activated.

Specifies the language of voice prompts that the
VPS broadcasts to the Subscriber during a
Message Waiting Notification call and Subscriber
service.
[Note]
If User 1 or User 2 is specified as Prompt Mode
but not recorded by the Message Manager, the
VPS automatically broadcasts the factory recorded
System prompts (English) to the Subscriber.
By default, both User 1 and User 2 prompts are
not recorded.

Intercom Paging
Group

Prompt Mode

1–8

(1)

1. SYSTEM
2. USER 1
3. USER 2

(USER 1)

Incomplete
Call
Handling
Service
p.3-29

Intercom
Paging
Parameter
p.4-71

Subscriber
Service
p.3-56

Voice
Prompts
p.3-58

COS Nos. 63, 64 (for Managers)

System Administration Top Menu 

→

 1 

→

 2 

→

 COS No. (63, 64) 

→

 1

Recording
User
Prompts
p.6-15

Parameter

Description/Function

Reference

Program – Class of Service – Class of Service Setting Menu

CLASS OF SERVICE No. [63]

(for Message Manager)

Personal Greeting Length (8-60 sec) ---------------------------------

: —

New Message Retention Time (1-30 days) ------------------------

: 30

Saved Message Retention Time (1-30 days, 0: Unlimited) --- : 30
Message Length (1-6 min.) ----------------------------------------------

: 6

Mailbox Capacity Maximum Messages (5-100 msgs) -----------

: 100

Mailbox Capacity Maximum Message Time (5-100 min.) ------

: 100

Message Retrieval Order -------------------------------------------------

: LIFO

Message Scanning with Information ----------------------------------

: No

Play System Prompt after Personal Greeting ---------------------

: —

Use Call Waiting on Busy ------------------------------------------------

: —

Message Cancel for Live Call screening ----------------------------

: —

Direct Mailbox Access -----------------------------------------------------

: —

Intercom Paging Group (1-8) --------------------------------------------

: —

Prompt Mode -----------------------------------------------------------------

: —

Summary of Contents for KX-TVP200E























































































































































































































































































































































































































Reviews:

No comments

Related manuals for KX-TVP200E

Brands by name

Popular brands

Load more brands