System Manager
5-9
5.4
Setting COS (Class of Service)
Parameters
Message Cancel for Live Call Screening Status
31
The current setting is played.
Press
1
to change the current setting (enable or disable).
32
Confirm your entry and press
2
to accept it.
Direct Mailbox Access Status
33
The current setting is played.
Press
1
to change the current setting (enable or disable).
34
Confirm your entry and press
2
to accept it.
Intercom Paging Group Number
35
The current setting is played.
Press
1
to change the current number.
36
Enter the group number (1 – 8).
37
Confirm your entry and press
2
to accept it.
Subscriber Service Prompt Mode
38
The current setting is played.
Press
1
–
3
to change the desired mode.
39
Confirm your entry and press
4
to accept it.
Tip:
Step 38 –
1
System Prompt
2
User 1 Prompt
3
User 2 Prompt
4
Accept the current prompt mode
Message Notification Status
40
The current setting is played.
Press
1
to change the setting (enable or disable).
If the Message Notification Status is enabled, go to step 41 – 45.
41
Press
1
–
5
to choose the desired Beeper Callback No.
Entry Mode or press
6
to accept it.
Tip:
Step 41 –
You can set the way of pager access.
1
Caller Select Mode
2
Without Message Mode
3
Before Message Recording Mode
4
After Message Recording Mode
5
Disable All Entry Mode (Caller cannot access pager)
