4-42
System Administrator
4.5.4
Service Settings
Activates or deactivates the Operator service.
[Note]
If the Operator service is deactivated, operator-
seeking calls are transferred to the General Delivery
Mailbox.
Specifies Operator 1’s extension number.
[Note]
The default setting (0) is not applicable to the
Message Waiting Notification-Lamp feature. For
the Operator 1 to have this feature, assign an
extension number which comes under the Extension
Numbering Plan.
The caller to Operator 1’s extension may be
prompted to leave a message in this mailbox
depending on the settings of “Busy Coverage Mode”
or “No-answer Coverage Mode”.
Managing
the G.D.M.
p.6-5
M.W.N.-
Lamp
p.3-41
Operator’s
Extensions
p.6-10
Operator
Service
p.3-46
Operator Service
Operator’s
Extension
Operator’s
Mailbox No.
1. Disable
2. Enable
(Enable)
2–5 digits
(0)
2–5 digits
(998)
Operator 1 – Day Mode
Activates or deactivates the Operator service, specifies Operator 1’s extension and
the treatment of calls transferred to Operator 1’s extension. When Operator service
is activated, operator-seeking calls are first transferred to Operator 1’s extension.
System Administration Top Menu
→
1
→
4
→
1
→
2
→
1
→
1
Program – Service Set – Auto. Attn. – Operator – Day Mode – Operator 1 Menu
Operator Service ------------------------------------------------------ : Enable
Operator’s Extension ------------------------------------------------ : 0
Operator’s Mailbox No. --------------------------------------------- : 998
Operator No-answer Time (10-60 sec) ------------------------ : 30
Busy Coverage Mode ----------------------------------------------- : Hold
No-answer Coverage Mode --------------------------------------- : Caller Select
Message Repeat Cycle --------------------------------------------- : 3
Extension
Numbering
Plan
p.4-63
Parameter
Value Range
(default)
Description/Function
Reference