Panasonic KX-TVP200 Installation Manual Download

Page: 332 / 408

MESSAGE MANAGER'S GUIDE

332

Installation Manual

Enter the Caller ID List Number

(1-120) to be modified.

Note

•

Enter [ ] to return to Step 3.

•

To record system caller names, first Caller ID numbers must be assigned (see
B6.6

System Caller Name Announcement).

The VPS plays the Caller ID number and its name. To change the name, Press [1]. If a name
has not yet been recorded for this Caller ID number, go to Step 6.

Note

•

Press [2] to accept the current name—Return to Step 4.

•

Press [3] to erase the current name—Return to Step 4.

Record the name at the tone and Press [1].

The VPS plays the recorded name. Press [2] to accept it.

Note

•

Press [1] to change the recorded name—Return to Step 6.

•

Press [3] to erase the recorded name—Return to Step 4.

Repeat Steps 4-7 to record names for other Caller ID List numbers.

Guidance is "Caller Name Announcement number".

Summary of Contents for KX-TVP200

























































































































































































































































































































































































































Search results

Summary of Contents for KX-TVP200

Reviews:

Related manuals for KX-TVP200

Brands by name

Popular brands

Panasonic KX-TVP200, Installation Manual

Search results

Summary of Contents for KX-TVP200

Reviews:

Related manuals for KX-TVP200

Brands by name

Popular brands