Panasonic KX-TVP200, Installation Manual

Page: 228 / 408

SYSTEM ADMINISTRATOR'S GUIDE
228 Installation Manual
Message
Scanning with
Information 1. Yes
2. No
(No)
If set to "Yes", the VPS adds the message sender's name
and the recording date and time to the message during
the message scan.
Play System
Prompt after
Personal
Greeting 1. Yes
2. No
(No)
If set to "Yes", directions for recording a message are
given to the caller immediately after the personal
greeting has been played.
The following guidance messages are played:
"To end recording, hang up or press 1 for more
features".
"To pause and restart recording, press 2".
Use Call
Waiting
on Busy 1. Yes
2. No
(No)
If set to "Yes", the VPS signals the busy extension that
another call is waiting.
Note: To use Call Waiting on Busy, you must also enable
the use of the Call Waiting feature at your PBX.
Message
Cancel for Live
Call Screening 1. Yes
2. No
(Yes)
The Live Call Screening feature permits the subscriber to
monitor incoming messages as they are being recorded,
or intercept them if desired. If the subscriber chooses to
speak to the caller, if not disabled by the PBX
beforehand, the VPS will record the two-way
conversation. If set to "Yes", the VPS will automatically
delete this recording.
The two-way conversation may be saved in the mailbox
if the PBX allows the conversation to be recorded. If set
to "No", the recording will be automatically saved.
Note: The Live Call Screening feature is available if
DPT Voice Mail Integration is activated with a Panasonic
KX-TD series telephone system.
Direct Mailbox
Access 1. Yes
2. No
(Yes)
If set to "Yes", a subscriber is able to directly enter
Subscriber Service. This is accomplished by calling a
VPS extension directly from the subscriber's extension.
The Subscriber Service Access Code (" " and mailbox
number) need not be dialled. Password entry may be
required if specified beforehand.
Note: The Direct Mailbox Access feature is available if
DPT Voice Mail Integration is activated with a Panasonic
KX-TD series telephone system.
Table 39
Parameter Value Range
(Default)
Description/Function