Panasonic KX-TVP200, Installation Manual, Page: 302 / 408

SYSTEM MANAGER'S GUIDE
302 Installation Manual
External Message Delivery
Auto Forwarding
25. a)
The current setting plays. Press [1] to change the setting (enable or disable). If the
External Message Delivery is enabled, set the prompt mode for receiving External
Delivery Messages (go to Step 25b below).
b)
The current prompt mode plays. Press [1], [2], [3], or [4] to choose the desired
mode.
• [1] System Prompt
• [2] User 1 Prompt
• [3] User 2 Prompt
• [4] Selective Prompt
c)
Confirm the entry is correct and Press [5] to accept it. Return to Step 25a above.
26. a)
The current setting plays. Press [1] to change the setting (enable or disable). If Auto
Forwarding is enabled, go to Step 26b below.
b)
The current forwarding destination mailbox number plays. Press [1] to change the
mailbox number.
c)
Type the mailbox number.
d)
Confirm the entry is correct and Press [2] to accept it.
e)
The current delay time is played. Press [1] to change the setting. The delay time is
the period of time that the VPS must wait before forwarding messages. For
example, enter 115# to set the delay time to 1 h 15 min; 30# to set 30 min.
f)
Confirm the entry is correct and Press [2] to accept it.
g)
The current forwarding mode is played. Press [1] to change the setting (copy or
move).
h)
Confirm the entry is correct and Press [2] to accept it. Return to Step 26a above.