Panasonic KX-TVP200, Installation Manual

Page: 232 / 408

SYSTEM ADMINISTRATOR'S GUIDE
232 Installation Manual
Prompt Mode 1. System
2. User 1
3. User 2
4. Selective
(System)
When an external message is delivered, the receiver will
be greeted by the VPS in the specified language
(prompt). However, if "Selective" is enabled, then the
receiver has a choice of prompts. See related explanation
in "Incoming Call Service Prompt" in Table 21 in
5.3.1
Port Service Menu.
Note: When "Selective" is enabled and the receiver uses
a rotary telephone, the no-entry selection is specified by
"Prompt for Rotary Callers" in Table 21 in 5.3.1
Port
Service Menu.
Authorization
for Auto
Forwarding 1. Yes
2. No
(No)
If set to "Yes", the VPS automatically forwards messages
that have not been accessed for a specific length of time
to another mailbox. The sub-parameters to be set for this
feature include Mailbox Number, Delay Time, and
Forwarding Mode. If set to "No", sub-parameters cannot
be assigned.
Mailbox
Number 2-5 digits
(None)
Specifies the mailbox to which the messages will be
forwarded.
Note: The numbers of the System Group Distribution
List cannot be specified as the destination.
Delay Time (h) (min)
00:05 to 99:59
(00:30)
Specifies the length of time in hours and minutes that the
VPS must wait before forwarding unretrieved messages.
The maximum delay time is 99 h, 59 min.
Note: The delay time must be less than the New Message
Retention Time, or else messages will be deleted before
being forwarded.
Forwarding
Mode 1. Copy
2. Move
(Move)
Specifies if forwarded messages are to be retained in the
original mailbox. When set to "Copy", copies of the
messages are retained in the original mailbox after
forwarding. When set to "Move", messages are
forwarded to the receiving mailbox and are not retained
at the original location.
Table 39
Parameter Value Range
(Default)
Description/Function