![background image](http://html.mh-extra.com/html/panasonic/kx-tvp100e/kx-tvp100e_installation-manual-and-instructions-for-use_270104218.webp)
Message Manager
6-7
6.4
Setting up Message Waiting
Notification
You can have the VPS notify that unplayed messages are
waiting in your mailbox. You do not need to regularly
check your mailbox.
This feature has been authorized at the factory.
Two types of message waiting notification are available: no-
tification by message waiting lamp and notification by call-
ing. They can be enabled or disabled respectively.
1
Setting
M.W.N.
Message Manager’s
Main Command Menu
2
3
4
5
Change
M.W.Lamp
Status
1
2
3
Change
Way of
Notification
Assign
Tel No.
Go to
Step 4
6.4.1 Setting Message Waiting Lamp Status
The VPS illuminates the message waiting lamp on your tele-
phone when a new message is recorded in your mailbox.
1
Log in the main command menu.
2
Press
2
to set Message Waiting Notification.
3
Press
1
to change the Message Waiting Lamp Notification
Status.
4
Press
1
to change the Message Waiting Lamp Notification
status, or
2
to accept it.
6.4.2 Setting Notification by Calling Status
The VPS calls the preset telephone or beeper when a new
message is recorded in your mailbox. Set the following
three parameters as appropriate.
6.4.2.1 Setting Device Status
For each device, the notification is enabled, disabled or en-
abled on the preset schedule.
If you want to enable it on the schedule, contact with your
System Administrator as you are not allowed to set the
schedule yourself.