System Administrator
4-77
4.5.6
Hardware Settings
1. 100 msec
2. 300 msec
3. 600 msec
4. 900 msec
(100)
Specifies the length of time that the hookswitch
must be pressed before the PBX recognizes it as a
flash hook signal. See the manuals of PBX to
determine the correct value.
[NOTE]
You can select only “1. 100 msec”.
Flash Time
Value Range
(default)
Stop Bit Length
1. 1 bit
2. 2 bits
(1)
Specifies the number of bits used to signify the
end of the byte.
Data
Terminal or
Printer
Connection
p.2-15
4.5.6.2 Port Setting
The VPS must be connected to a PBX telephone line port before system start up.
System Administration Top Menu
→
1
→
6
→
2
Parameter
Description/Function
Reference
Program – Hardware – Port Setting Menu
1. Port 1
2. Port 2
3. Port 3
4. Port 4
SELECT ITEM AND PRESS RETURN–KEY
Port Setting Menu
System Administration Top Menu
→
1
→
6
→
2
→
1
Program – Hardware – Port Setting – Port 1 Menu
Flash Time -------------------------------------------------------------- : 100
CPC Signal ------------------------------------------------------------- : 6.5
Disconnect Time ------------------------------------------------------ : 2
Dial Mode --------------------------------------------------------------- : DTMF
Value Range
(default)
PBX Type
p.4-79
Parameter
Description/Function
Reference
Note:
The “Flash” means the register recall in this manual.
