manualshive.com logo in svg

Panasonic KX-TVP100E, Installation Manual And Instructions For Use

Share
Download
Panasonic KX-TVP100E Installation Manual And Instructions For Use Download Page 179

System Administrator

     4-71

4.5.5

System Parameter Settings

4.5.5.6.6 Rotary Telephone Service

Used to define the treatment of callers who are calling from a rotary telephone
(unable to input DTMF signals) or callers who cannot properly respond to the
guidance of the VPS in the Voice Mail service.

System Administration Top Menu 

→

 1 

→

 5 

→

 6 

→

  6

Program – System Parameter – Others – Rotary Telephone Service Menu

Rotary Telephone Call Coverage Day Mode --------------- : G.D.M.
Rotary Telephone Call Coverage Night Mode -------------- : G.D.M.

Rotary
Telephone Call
Coverage
(Day), (Night)

1. G.D.M.
2. OPERATOR

EXTENSION

(G.D.M.)

Value Range

(default)

Defines how the VPS treats callers who are calling
from a rotary telephone or callers who are
unfamiliar with the VPS operation.
[Note]
G.D.M. = General Delivery Mailbox

Operator
Service
p.3-46

Rotary
Telephone
Service
p.3-52

Parameter

Description/Function

Reference

4.5.5.6.7 Intercom Paging Parameter

Intercom Paging is a PBX feature which makes it possible to page a caller’s desired
party through built-in speakers of proprietary telephones.
To utilize this feature, the Intercom Paging feature must be available on your PBX
and the following parameters are properly programmed to meet the requirements
of your PBX.

Note:

This feature is available if D-PITS Voice Mail Integration with a
Panasonic KX-TD series telephone system is activated.

Summary of Contents for KX-TVP100E














































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands