![background image](http://html.mh-extra.com/html/panasonic/kx-tvp100e/kx-tvp100e_installation-manual-and-instructions-for-use_270104180.webp)
4-72
System Administrator
4.5.5
System Parameter Settings
System Administration Top Menu
→
1
→
5
→
6
→
7
Program – System Parameter – Others – Intercom Paging Parameter Menu
Intercom Paging Sequence --------------------------------------- :
. . . . . . . . . . .
Release for Intercom Paging ------------------------------------- :
. . . . . . . . . . .
No-answer Time for Intercom Paging (1-30 sec) --------- :
5
Announcement Repeat Cycle (1-3 times) -------------------- :
1
Intercom Paging Retry (1-10 times) --------------------------- :
2
Paging Code for Group 1 ----------------------------------------- :
. . . . . . . . . . .
Paging Code for Group 2 ----------------------------------------- :
. . . . . . . . . . .
Paging Code for Group 3 ----------------------------------------- :
. . . . . . . . . . .
Paging Code for Group 4 ----------------------------------------- :
. . . . . . . . . . .
Paging Code for Group 5 ----------------------------------------- :
. . . . . . . . . . .
Paging Code for Group 6 ----------------------------------------- :
. . . . . . . . . . .
Paging Code for Group 7 ----------------------------------------- :
. . . . . . . . . . .
Paging Code for Group 8 ----------------------------------------- :
. . . . . . . . . . .
Specifies the intercom paging sequence required by
your PBX.
Use up to 12 of the following eight letters and
twelve dial codes.
D : Disconnecting
F : Hook Flash
R : Ring Back Tone Detection
S : Silence Detection
T : Dial Tone Detection
W : Wait for 1 second
X : Pager Dialing
A : Answer
1–9, 0, , # : Dial Codes
Specifies the intercom paging release code required
by your PBX. Up to 12 alphanumeric characters
can be set using the same letters and dial codes as
the Intercom Paging sequence.
Specifies the length of time in seconds that the
VPS should wait before terminating the Intercom
Paging because there is no answer.
The VPS goes back to the caller if the paged party
does not respond before this timer expires.
Up to 12 digits
consisting of
0–9, , # and
special codes
(None)
Up to 12 digits
consisting of
0–9, , # and
special codes
(None)
1–30 sec
(5)
Value Range
(default)
Incomplete
Call
Handling
Service
p.3-29
Intercom
Paging
P.3-30
Parameter
Description/Function
Reference
Intercom
Paging
Sequence
Release for
Intercom
Paging
No-answer
Time for
Intercom
Paging