Useful Information
42
For assistance, please visit http://www.panasonic.com/phonehelp
Troubleshooting
Problem
Cause & solution
The cordless camera
does not work.
L
Check the connections (page 12).
The cordless camera’s
indicator is flashing
rapidly in red.
L
The cordless camera is not registered to the base unit.
Register the cordless camera to the base unit (page
15).
The cordless camera’s
indicator lights in orange.
L
The link between the cordless camera and your
computer could not be established. The resources
available for wireless communication are limited. Wait
for other users to finish and try again.
L
If you do not intend to view the images using your
computer, set the “
PC camera access
” to “
Off
” (page
21) with the base unit.
The cordless camera’s
indicator is flashing
rapidly in orange.
L
The IP address which has been assigned for the
cordless camera is invalid. Check the connections
(page 22).
I cannot read the
language displayed by
the MULTI TALK V
Camera Utility
application.
L
You can change the application’s display language to
English, French, or Spanish. Right-click the MULTI
TALK V Camera Utility icon in the task tray, then click
the desired language.
The image is faint.
L
The camera lens is dirty. Clean it with a soft dry cloth.
The image sent from the
cordless camera is poor.
L
Adjust the display sharpness or brightness setting
(page 30, 31).
L
The place where the cordless camera is located is dark.
Improve lighting.
The image sent from the
cordless camera is dark
and difficult to see.
L
Adjust the display brightness setting (page 31).
L
There is a strong sunlight or a backlight in the place
where the cordless camera is located. Try shading the
camera’s location.
I cannot connect to the
cordless camera, the
image distorts, or the
image is slow.
L
The cordless camera has lost communications with the
base unit. Move the cordless camera closer to the base
unit, and try again.
L
There is an obstacle such as concrete wall. Move the
cordless camera to the place without an obstacle.
L
A microwave or wireless LAN appliance is in use. Move
the cordless camera closer to the base unit or use the
cordless camera away from those appliances, and try
again.
