![background image](http://html.mh-extra.com/html/panasonic/kx-tda600-hybrid-ip-pbx-control-unit-max-1008-ports/kx-tda600-hybrid-ip-pbx-control-unit-max-1008-ports_installation-manual_270084322.webp)
PROBLEM
PROBABLE CAUSE
SOLUTION
•
The CS is not busy (i.e.,
the status of the LED is
not Moderate Green
Flashing), but calls
cannot be made or
received.
•
There is noise during a
phone call.
•
CSs are located too
close together in the
same area.
•
Reduce the number of CSs in the area, or
increase the distance between CSs (refer
to "2.10.5 Site Survey Using the
KX-TCA255/KX-TCA256/KX-TCA355/
KX-TD7590", "2.11.5 Site Survey", or
"2.12.5 Site Survey").
•
PS stays out of service
when the CS status is
changed from Out of
Service to In Service.
•
It may take about 20 s
for CS to start up after
the status has been
changed to In Service.
•
Wait until the CS starts up.
•
The maximum number
of PS calls that a
high-density CS
supports cannot be
made.
•
Poor connection
•
Make sure that a 4-pair cable is used for
connection.
322
Installation Manual
4.1.3 Operation
Summary of Contents for KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008 Ports
