Panasonic KX-TDA50G Feature Manual Download

Page: 77 / 378

Is the correct

PIN entered?

Does the caller press

while hearing the reorder

tone (Call Retry)?

Is the Walking COS/Verification

Code Entry feature number dialed?

Yes

None

All Security

CO Line Security

Yes

Is the dialed number

an extension number or

floating extension number?

Yes

Extension No./
Floating
Extension No.

What is the dialed number?

Feature No.

(Absent Message,
FWD, etc.)

The feature is set.

CO Line Access No.
+ Telephone No.

Other

The dialed number is sent to the CO line.

Reorder tone

Yes

No Security

The call is disconnected.

Continued from previous page

(DISA Reorder
Tone time

expires

)

Yes

Is the extension

in DND mode?

Yes

The call is established.

The call is routed to the
intercept destination.
(DISA Intercept Routing
No Answer)

Does the destination

answer the call?

Does the

destination

answer

the call?

Yes

The call is established.

The call is disconnected.

Does the caller press

while hearing a ringback

tone (Call Retry)?

The call is directed to the extension.
The caller hears a ringback tone.

(DISA Disconnect
Time after
Intercept

expires

)

(DISA Intercept
time

expires

)

Feature numbers are available only when the Walking COS feature is used.

Is the extension

busy?

Is Call Waiting

mode on?

Yes

Continued on next page

Document Version 2008-11

Feature Manual

4.1.7 DISA (Direct Inward System Access)

Summary of Contents for KX-TDA50G



























































































































































































































































































































































































Search results

Summary of Contents for KX-TDA50G

Reviews:

Related manuals for KX-TDA50G

Brands by name

Popular brands

Panasonic KX-TDA50G, Feature Manual

Search results

Summary of Contents for KX-TDA50G

Reviews:

Related manuals for KX-TDA50G

Brands by name

Popular brands