Panasonic KX-TDA50G Feature Manual Download Page 3 | Manualshive

Page: 3 / 378

background image

Abbreviations

There are many abbreviations used in this manual (e.g., "PT", for proprietary telephone). Please refer to the
list in the next section for the meaning of each abbreviation.

Note

•

The contents of this manual apply to PBXs with a certain software version, as indicated on the cover
of this manual. To confirm the software version of your PBX, see 2.7.1 Frequently Asked Questions
(FAQ) in the FAQ of the PC Programming Manual, or [190] Main Processing (MPR) Software Version
Reference in the PT Programming Manual.

•

Some optional service cards, PTs, and features are not available in some areas. In the same respect,
some optional service cards and features are available exclusively for the KX-TDA50, KX-TDA100,
KX-TDA200, or KX-TDA600. Please consult your certified Panasonic dealer for more information.

®

21.2 Exclusive Features Table

•

Product specifications are subject to change without notice. In some cases, additional information,
including updates to this and other manuals, is included in the Maintenance Console’s

Information

before programming

. Install the latest version of Maintenance Console to view this information.

•

In this manual, model number suffixes (e.g., KX-TDA50

G

) are omitted unless necessary.

•

All system programming can be performed through PC programming (

®

13.1.6 PC Programming).

However, only a subset can be performed through PT programming (

®

13.1.28 PT Programming).

Throughout this manual, programming references are included as follows:

PC Programming

The number within the brackets indicates the System Menu number for the Maintenance Console.

®

8.1 [6-1] System Speed Dial—

CO Line Access Telephone Number

PT Programming

The number within the brackets indicates the programming number that is entered when performing
PT programming.

®

[001] System Speed Dialing Number

For further details, please refer to the PC Programming Manual and PT Programming Manual.

Safety Notices

Please observe the safety notices in this manual in order to avoid danger to users or other people, and prevent
damage to property.
The notices are classified as follows, according to the severity of injury or damage:

WARNING

This notice means that misuse could result in death or serious injury.

CAUTION

This notice means that misuse could result in injury or damage to property.

WARNING

Unplug the PBX from the AC outlet if it emits smoke, an abnormal smell or makes unusual noise.
These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an
authorized Panasonic Factory Service Center.

Trademarks

•

Microsoft and Outlook are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.

•

The Bluetooth

®

word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by

Panasonic Corporation is under license.

•

All other trademarks identified herein are the property of their respective owners.

Document Version 2008-11

Feature Manual

3

Introduction

«
1
2
3
4
5
...
»

Summary of Contents for KX-TDA50G



























































































































































































































































































































































































Reviews:

No comments

Related manuals for KX-TDA50G

Brand: MCK Pages: 43

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands