manualshive.com logo in svg

Panasonic KX-TDA50G, Feature Manual

Share
Download
Panasonic KX-TDA50G Feature Manual Download Page 312

[Programming Example: DIL Table]

The DIL Table can be programmed to direct calls to a different destination for each time mode based on
the CO line receiving the call. Calls can, for example, be directed to an ICD group during the day mode,
or to the Voice Mail (VM) service of a VPS during the lunch and night modes.

Port No. 

(CO Line No.)

DIL Destination

Tenant (Time

Table) No.

Day

Lunch

Break

Night

01

02

1

2

105

210

150

200

105

210

150

200

Explanation:

A call is received at 20:00 on CO line 01.

1.

The call will be handled by Time Table 1.

2.

The current time mode is "night" (shown in "Programming Example: Time Table", above).

3.

The call is directed to extension 150, which is a floating extension number used by the VPS
(programming not shown here).

4.

Holiday Mode

The PBX can also accommodate 24 different holidays. The start and end date of each holiday can be
programmed, and all holidays are assigned a single time mode. For example, if the "night" mode is assigned
as the time mode for holidays, and a holiday begins December 31st and ends January 1st, all PBX features
will use their "night" settings from 0:00 A.M. on December 31st until 0:00 A.M. on January 1st.

5.

Time Service Button

A flexible button can be customized as one of the following Time Service buttons:

a.

Day/Night button

b.

Day/Night/Lunch button

c.

Day/Night/Break button

d.

Day/Night/Lunch/Break button

These buttons can be used to switch the current time mode: pressing the Day/Night button will toggle
between the day and night modes, for example.
Each Time Service button will display the current time mode using a different light pattern or color, as
shown below.

Light Pattern

Current Time Mode

Off

Day

Red on

Night

Green on

Lunch

Slow green flashing

Break

Slow red flashing

Holiday

Note

Pressing a Time Service button will change the current time mode only if the COS assigned to the
extension is authorized to do so or if the extension is assigned as a manager. All other extension users
can press this button on their proprietary telephones (PTs) to display the current time mode.

312

Feature Manual

Document Version  2008-11  

17.1.5 Time Service

Summary of Contents for KX-TDA50G



























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands