manualshive.com logo in svg

Panasonic KX-TDA50G, Feature Manual

Share
Download
Panasonic KX-TDA50G Feature Manual Download Page 98

d.

Super Hybrid Port:

 DPT, APT, SLT, DSS Console, Panasonic VPS, and PT-interface CS

e.

Hybrid Port (For KX-TDA50 only):

 APT, SLT, DSS Console, Panasonic VPS, and PT-interface CS

EXtra Device Port (XDP):

A Super Hybrid port can be used as an XDP port, allowing two telephones (a DPT and an SLT) to be connected
to the same port of the PBX. This XDP port can be used in one of the following modes:

Mode

Description

Parallel Mode

The DPT and an SLT share the 

same extension number

 so that they

can act as one extension. The SLT uses the extension data (extension
number, Class of Service [COS], etc.) of the DPT. (

®

13.1.2  Paralleled Telephone)

XDP Mode

The DPT and SLT have 

different extension numbers

 and act as

independent extensions. To use XDP mode, XDP mode must be
enabled for the port through system programming. (

®

13.1.2  Paralleled Telephone)

Conditions

•

Automatic Detection on Hybrid/Super Hybrid Port

A DPT, SLT, or PT-interface CS connected to a Super Hybrid port or an APT, SLT or PT-interface CS
connected to a Hybrid port can be detected automatically without any programming. An APT connected to
a Super Hybrid port can be detected automatically when XDP mode has been disabled.

•

A DSS Console or a Panasonic VPS which supports DPT (Digital) Integration can also be connected with
an SLT in XDP mode.

•

APT and SLT in Parallel Mode

An APT and an SLT can also be connected to a Super Hybrid port and used in parallel mode.

•

Digital XDP

A DPT can be connected to another DPT and act as an independent extension with its own extension
number. (

®

 13.1.2  Paralleled Telephone)

•

Wireless XDP Parallel Mode

A PS can be used in Wireless XDP Parallel mode with a wired telephone.
(

®

 20.1.4  Wireless XDP Parallel Mode)

•

DSS Console and Paired Telephone Assignment

When a DSS Console is connected, a PT must be paired with the DSS Console through system
programming.

PC Programming Manual References

3.5  [1-1] Slot—Port Property - Extension Port
6.17  [4-3] DSS Console—

Pair Extension

PT Programming Manual References

[007] DSS Console Paired Telephone
[600] EXtra Device Port (XDP) Mode

98

Feature Manual

Document Version  2008-11  

5.1.7 Extension Port Configuration

Summary of Contents for KX-TDA50G



























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands