Home
/
Panasonic
/
KX-TDA50G
/
Feature Manual

Panasonic KX-TDA50G, Feature Manual

Share

Page: 122 / 378

Panasonic KX-TDA50G Feature Manual Download Page 122

Type

Description

FWD for Incoming Call
Distribution Group

Group FWD—Internal Works for incoming intercom calls

Group FWD—External Works for incoming CO line calls

Group FWD—Both

Works for all incoming calls

[Button Status]

The Group FWD button shows the current status as follows:

Light Pattern

Status (default)

Red on

FWD on

Off

FWD off

FWD/DND Setting by Fixed FWD/DND button

Pressing the fixed FWD/DND button in idle status allows the extension user to set the following items for FWD/
DND:

•

FWD/DND for CO line calls
The FWD/DND status for CO line calls to that extension can be switched temporarily without clearing the
FWD destination. During setting, the LED of the button shows the current CO line call FWD/DND status.
The forwarding type and destination for CO line calls can also be set.

•

FWD/DND for intercom calls
The FWD/DND status for intercom calls to that extension can be switched temporarily without clearing the
FWD destination. During setting, the LED of the button shows the current intercom call FWD/DND status.
The forwarding type and destination for intercom calls can also be set.

•

FWD—No Answer timer
The length of time until unanswered calls are forwarded can be modified. This setting is applied to both
intercom and CO line call forwarding.

•

FWD for Virtual PS
If the extension is the first registered extension in an Incoming Call Distribution Group, the extension user
can set the FWD destination and forwarding status (on/off) for up to 4 virtual PSs preregistered to the group.
(

®

19.1.2 Virtual PS)

These settings are only available when FWD/DND buttons are set through system programming to FWD/DND
Setting mode.

Conditions

•

When FWD/DND buttons are set to FWD/DND Cycle Switch mode, pressing the FWD/DND button cycles
the FWD/DND setting.
In this mode, when intercom calls are set to be handled differently from CO line calls (forwarding type,
forward destination, DND on/off):

a.

in idle mode, the light patterns of the FWD/DND—Both button (including FWD/DND button [fixed
button]) and the Group FWD—Both button will indicate the setting for either CO line calls or intercom
calls, but not both.

b.

the FWD and DND icons on a PS display reflect the settings for CO line calls only.

c.

pressing the FWD/DND—Both button (including FWD/DND button [fixed button]) or the Group FWD—
Both button will be ignored.

122

Feature Manual

Document Version 2008-11

6.1.7 FWD/DND Button, Group FWD Button

«
...
120
121
122
123
124
...
»

Summary of Contents for KX-TDA50G



























































































































































































































































































































































































Reviews:

No comments

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands