Panasonic KX-TDA50G, Feature Manual

Page: 279 / 378

→ Redial—Save Dial After Connection to Redial Memory
→ Redial—Call Log by Redial key
6.1 [4-1-1] Wired Extension—Extension Settings—Option 7— Outgoing Call Log Memory
6.10 [4-2-1] Portable Station—Extension Settings—Option 7— Outgoing Call Log Memory
PT Programming Manual References
[205] Automatic Redial Repeat Times (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
21.1 Capacity of System Resources
Operating Manual References
1.3.58 Redial, Last Number
1.4.1 Call Log, Incoming
15.1.2 Ring Tone Pattern Selection
Description
It is possible to select the type of ring tone pattern that arrives at an extension for each type of incoming call,
etc.
[Ring Tone Patterns]
1 280 ms
Single
Double
Triple
S-Double
* The duration of a ring tone may vary by country/area.
[Ring Tone Pattern Table]
The ring tone pattern table is categorized into three parts, each containing a specified number of pattern plans.
The ring tone pattern table is categorized as follows:
•
Incoming CO Line Calls: each pattern plan can assign a ring tone pattern for each trunk group.
4.14 [2-8-1] Ring Tone Patterns—Call from CO
•
Incoming Doorphone Calls: each pattern plan can assign a ring tone pattern for each doorphone.
4.15 [2-8-2] Ring Tone Patterns—Call from Doorphone
•
Others: each pattern plan can assign a ring tone pattern for incoming intercom calls as well as ring tones
assigned to certain features (e.g., timed reminder).
4.16 [2-8-3] Ring Tone Patterns—Call from Others
Document Version 2008-11 Feature Manual 279
15.1.2 Ring Tone Pattern Selection