Panasonic KX-TD500, Programming Manual

Page: 34 / 392

Configuration
34 Programming Guide
Parameter Group No.
Default 1
Value Range 1-48 or 1-128
Description/Function Type: CO, Qsig-Master, Qsig-Slave
Specifies the Trunk Group (1-48) to which the BRI port is assigned.
Type: EXT
Specifies the Extension Group (1-128) to which the BRI port is
assigned.
Reference • 1.3 System Features (F/G)
– Extension Group
– Trunk Group
• 3.1 TIE Line Features (F/G)
– TIE Line Service
• 3.2 Trunk Group (P/G)
• 3.3 Extension Group (P/G)
Parameter Status
Default —
Value Range 1.
INS
2.
OUS
3.
FAULT
Description/Function Specifies the operating status of the BRI port.
1.
INS: The BRI port is In-Service.
2.
OUS: The BRI port is Out-of-Service.
3.
FAULT: The BRI port is defective (hardware).
In this case, the LED indicator on the BRI card will light.
Reference None
Parameter DN Refer
Default —
Value Range —
Description/Function Displays the list of DNs/FDNs which are already assigned to the
extensions / system resources.
Reference None