Line
Programming Guide
181
Parameter
[TIE Line] Type
Default
4 wires
Value Range
1.
2 wires
2.
4 wires
Description/Function
Specifies the voice path type of TIE Lines.
Reference
• 3.1 TIE Line Features (F/G)
– TIE Line Service
Parameter
[TIE Line] Sensitivity - IN EXT
Default
0 dB
Value Range
- 3 to +6 dB in 3 dB increments
Description/Function
Specifies the voice level for reception.
Note
•
When this setting is specified in a CO-to-CO and an
Extension-to-CO speech path respectively, the LPR software
version of the E&M card must be set to "2" or later. If the
LPR software version of the E&M card is less than "1," the
setting for a CO-to-CO speech path always works.
Reference
• 3.1 TIE Line Features (F/G)
– TIE Line Service
Parameter
[TIE Line] Sensitivity - IN CO
Default
0 dB
Value Range
- 3 to +6 dB in 3 dB increments
Description/Function
Specifies the voice level for reception.
Reference
• 3.1 TIE Line Features (F/G)
– TIE Line Service
Parameter
[TIE Line] Sensitivity - OUT EXT
Default
0 dB
Value Range
- 3 to +6 dB in 3 dB increments
Description/Function
Specifies the voice level for transmission.
Reference
• 3.1 TIE Line Features (F/G)
– TIE Line Service
Summary of Contents for KX-TD500
