Panasonic KX-TD500, Programming Manual

Page: 308 / 392

DDI/DID
308 Programming Guide
Parameter Automatic Registration
Default —
Value Range —
Description/Function You can enter into "Automatic Registration" screen (Section 9.2.2)
by clicking on this screen.
Reference None
Parameter DDI / DID / MSN No.
Default Blank
Value Range Up to 16 digits consisting of 0-9
Description/Function Specifies the DDI / DID / MSN number which will be sent from the
Central Office to the KX-TD500 system.
Note
• The DDI / DID / MSN number which has already been
assigned cannot be registered.
Reference • 1.5 Attended Features (F/G)
– Direct Inward Dialling (DID)
• 2.4 ISDN Attended Features (F/G)
– Direct Dialling In (DDI)
– Multiple Subscriber Number (MSN) Ringing Service
Parameter Tenant No.
Default 1
Value Range 1-8
Description/Function Specifies the tenant used for DDI / DID call when "DID / DDI No."
is specified in "Tenant Select Mode for DID / DDI" programming
in Section "2.8 System Option."
Reference • 1.5 Attended Features (F/G)
– Direct Inward Dialling (DID)
• 2.4 ISDN Attended Features (F/G)
– Direct Dialling In (DDI)
• 2.8 System Option (P/G)
– Tenant Select Mode for DID / DDI