Panasonic KX-T7020 Page 47 User Manual Download

Page: 47 / 280

User Programming

User Manual

3.1.2

Programming Methods

Advancing to the next stage

When "USR-PGM NO?

" is displayed, you can select one of the following:

•

To go to program [000], press the NEXT button.

•

To go to another program, enter the 3-digit program address.

Storing your data

Press STORE to store your data.

•

The STORE indicator lights red and a confirmation tone sounds.

Making another selection within the same program address

•

To go to the next selection, press NEXT.

•

To go to the previous selection, press PREV.

•

To make a specific selection, press SELECT and then enter the number.

Accessing another program address

While displaying the program address and title:

•

To go to the next Larger program address:

Press the

or MESSAGE button.

•

To go to the next Smaller program address:

Press the

or SECRET (INTERCOM) button.

While programming:

•

To go to a specific program address:
Press END, then enter the program address.

Returning to the operation mode

Lift the handset while in programming mode.

When the Initial Message:

USR-PGM NO?

is displayed, press the PAUSE button.

(To display the Initial Message, press END.)

* Confirmation tone (one beep)

After pressing STORE, you will hear a beep. This informs you that storage has been
completed successfully.

* Confirmation tone (two beeps)

This informs you that the parameter has already been stored.

* Alarm tone (three beeps)

If you hear this alarm, your entry is not valid.

Summary of Contents for KX-T7020

























































































































































































































































































Search results

Summary of Contents for KX-T7020

Reviews:

Related manuals for KX-T7020

Brands by name

Popular brands

Panasonic KX-T7020, User Manual

Search results

Summary of Contents for KX-T7020

Reviews:

Related manuals for KX-T7020

Brands by name

Popular brands