Panasonic KX-T7020 User Manual Download Page 190

Page: 190 / 280

Station Features and Operation (PT/SLT)

190

User Manual

Using Paging — External: to all external pagers

Using Paging — External: to a particular external pager

PT and SLT

Dial tone

Confirmation tone
(optional)

Announce.

Wait for an answer.

Dial 320.

During a conversation;

Hang up or press SP-PHONE/MONITOR.

For PT: Press TRANSFER.
For SLT: Flash the hookswitch.

For SLT

For PT

The other party is placed on
consultation hold.

• The held party and paged extension are connected

and can start a conversation.

TRANSFER

Any Telephone

Dial tone

Confirmation tone
(optional)

Announce.

Wait for an answer.

Dial 32.

During a conversation;

Hang up or press SP-PHONE/MONITOR.

For PT: Press TRANSFER.
For SLT: Flash the hookswitch.

For SLT

For PT

Dial external pager number
( 1 through 2).

external pager no.

• The other party is placed on

consultation hold.

• The held party and paged extension are connected

and can start a conversation.

TRANSFER

Summary of Contents for KX-T7020

























































































































































































































































































Search results

Summary of Contents for KX-T7020

Reviews:

Panasonic KX-T7020, User Manual, Page: 190 / 280

Search results

Summary of Contents for KX-T7020

Reviews: