manualshive.com logo in svg

Panasonic KX-T7020, User Manual, Page: 156 / 280

Share
Download
Panasonic KX-T7020 User Manual Download Page 156

Station Features and Operation (PT/SLT)

156

User Manual

4.3.50

Hands-free Operation [PT only] 

You can answer an intercom call without lifting the handset.

Setting

Switching from the handset to hands-free mode 

Switching from hands-free to the handset mode 

Conditions

•

The hands-free mode is canceled if you do not start dialing within 10 seconds.

•

The KX-T7050 and KX-T7055 have a MONITOR button instead of a SP-PHONE button. 
It can be used for hands-free dialing, etc., but not for a hands-free conversation.

•

You can enable hands-free mode by pressing a CO or INTERCOM button without going 
off-hook.

•

When "Full One-Touch Dialing" is enabled, pressing a One-Touch Dialing, DSS, Phantom, 
REDIAL or SAVE button provides the hands-free mode.

PT

Press SP-PHONE.

The microphone and speaker are now activated and the
hands-free operation is available.

SP-PHONE

PT

Press SP-PHONE.

Hang up.

• Do not replace the handset without pressing the SP-PHONE button

first, or the line will be disconnected.

SP-PHONE

PT

Lift the handset.

Summary of Contents for KX-T7020

























































































































































































































































































Reviews:

No comments