Panasonic KX-T7020 Page 261 User Manual Download

Page: 261 / 280

Appendix

User Manual

261

Alarm Not Stored

Confirm "Timed Reminder" programming when it is not
stored.

All Call Page

Access to "Paging — All".

At Ext 123

Absent Message 3.

Back at 11:00

Absent Message 4.

BGM On

Start BGM.

BGM Off

Stop BGM.

Break Mode

Complete to set "Break Mode".

Busy

Resource is busy.

Busy Ovrde Allow

Cancel "Executive Busy Override Deny".

Busy Ovrde Deny

Complete to set "Executive Busy Override Deny".

C.Pickup Allow

Cancel "Call Pickup Deny".

C.Pickup Deny

Complete to set "Call Pickup Deny".

Callback Ext1234

Complete to set "Camp-On".

Callback CO01

Complete to set "Camp-On".

Callback TRG 1

Complete to set "Camp-On".

Callback

CO *

Complete to set "Camp-On" when there is no idle outside
line.

Call Parked at 1

Complete to set "Call Park".

Call Waiting Off

Cancel "Call Waiting".

Call Waiting on

Complete to set "Call Waiting".

CID Log Clear

Clear all logs.

CO 01

Idle outside line is captured.

CO01:

Called by an outside line.

CO 01

0:01'15

Duration time of incoming outside call.

CO 01 & CO 02

Conference with two outside lines.

Called by hold recall. — "Conference, Unattended"

CO 03:

Free

Called by "Camp-On" (Outside line recall).

CO 02:AB COMPANY

Received an outside call with a Caller ID; the outside line
number and the outside line name are assigned.

Conference

Confirm key programming on the Conference button.

CO in Use

The selected outside line is busy.

CO Not Assigned

The desired outside line is restricted (not assigned).

Display

Description

Summary of Contents for KX-T7020

























































































































































































































































































Search results

Summary of Contents for KX-T7020

Reviews:

Related manuals for KX-T7020

Brands by name

Popular brands

Panasonic KX-T7020, User Manual

Search results

Summary of Contents for KX-T7020

Reviews:

Related manuals for KX-T7020

Brands by name

Popular brands