manualshive.com logo in svg

Panasonic KX-T7020, User Manual, Page: 215 / 280

Share
Download
Panasonic KX-T7020 User Manual Download Page 215

Station Features and Operation (PT/SLT)

User Manual

215

Checking the setting time

Stopping the alarm

Conditions

•

System Time
The system clock must be set before the alarm is set.

•

Timed Reminder message can be recorded by the Manager or an Operator. ("Outgoing 
Message (OGM)"). When the alarm is heard, you can hear the message by going off-hook, 
if it has been recorded. You hear an intermittent tone (dial tone 3) instead of the message in 
the following cases:

a)

A DISA Card is not equipped.

b)

All DISA ports are busy or OUS (Out-of-Service).

•

If other extension user calls your extension when the alarm is sounding, he or she will hear 
a busy tone.

•

If you receive an incoming outside call during the alarm, the ringing starts after the alarm 
stops.

•

If you are having a conversation at the time the alarm is set to sound, the alarm starts after 
the conversation.

Display PT

Dial 762.

Lift the handset or press
SP-PHONE.

Hang up or press
SP-PHONE.

2

6

7

Dial tone

If "10:10 AM" has been set:
<PT Display Example>

– one time

or

 – daily

Alarm  10:10AM

 

Alarm  10:10AM

Lift the handset.

Pressing any key also stops the alarm (PT only).

Any Telephone

Summary of Contents for KX-T7020

























































































































































































































































































Reviews:

No comments