Panasonic KX-PS8000 Operating Instructions Manual Download Page 134

Page: 134 / 161

134

Care and Maintenance

Repacking

It is highly recommended that you keep the original cartons and ALL packing
materials. Should you need to transport or ship your scanner and/or printer, please
follow these instructions.

Safety Caution:

The scanner weighs about 17.3 k

{38.1 lbs.} and the printer weighs

approximately 47.9 k

{105.5 lbs.}. They must be handled by two people.

Notes:

Should you need to send your scanner and/or printer for service, consult your
reseller first or Panasonic.

Please use the original cartons and all of the original packing materials.

Improper repacking of the printer may result in a service charge to remove
spilled toner.

Since the printer uses dry toner, extreme care must be taken when handling.
The printer should be handled in the upright (vertical) position.

Material required:

Original cartons and packing materials

Newspaper or drop cloth

Shipping tape and scissors

Summary of Contents for KX-PS8000


































































































































































Search results

Summary of Contents for KX-PS8000

Reviews:

Related manuals for KX-PS8000

Brands by name

Popular brands

Panasonic KX-PS8000, Operating Instructions Manual

Search results

Summary of Contents for KX-PS8000

Reviews:

Related manuals for KX-PS8000

Brands by name

Popular brands