76
Basic Operations
Perform the following and go to
page 77
or
80
depending upon
the operation.
■
Using the ADF
#
Fan the stack of documents and tap it on a level surface to
avoid document jams.
$
Insert the documents fully in the ADF tray with the printed
sides facing up and top of the documents first.
The height of document should not exceed the limit mark on the document
guide, or it may cause a jam.
%
Adjust the document guides to the width of the documents.
■
Using the scanner glass
#
Open the ADF.
$
Place the document face down on the scanner glass referring
to the document position marks.
%
Close the ADF.
Notes:
B
When scanning a book type document of more than 2 cm (0.79
″
)
thickness, scan it with the ADF open.
B
Scanning a document using the flatbed (scanner glass) produces better quality
than scanning it using the ADF. For best scanning quality use flatbed scanning.
B
If you scan poorly fixed originals such as catalogs using ADF, they may be
partially stained. To prevent the originals from getting stained, use the flat bed
scanning.
Placing Documents
$
#
%
%
$
%
