Panasonic KX-PS8000 Operating Instructions Manual Download Page 114

Page: 114 / 161

114

Trouble

ADF doesn’t feed
document.

Corrective Action

Condensation has
occurred.

Use a recommended
SCSI-2 board

(

☞

P. 16)

Consult the Utilities and
Drivers Reference
manual.

Unlock the scanner

(

☞

P. 30).

Care and Maintenance

Troubleshooting

Scanner

Possible Cause

Connect the AC cord.

Connect the SCSI cable

(

☞

P. 44-50)

Set the SCSI ID No.
correctly

(

☞

P. 52)

Install the software

(

☞

P. 55)

Clean the document.

Clean the scanner glass.

Reposition the document
correctly according to the
size.

Set the document evenly.

Scan the document by
placing it on the scanner
glass.

The height of document
should not exceed the
limit mark on the
document guide.

AC cord is not
connected.

Scanner is locked.

SCSI cable is not
properly connected.

SCSI ID No. is not set
correctly.

SCSI-2 board is not
compatible.

Software may not be
installed.

Original document is dirty.

Scanner glass is dirty.

Document is not
positioned correctly.

Document is not evenly
set on the scanner glass.

You may not be using the
software utility correctly.

Document thickness is
out of specifications.

Too many documents are
inserted in the ADF tray.

Scanner does not turn
on.

Scanning operation can-
not be performed.

Scanned image is dirty.

One or both ends of
image is/are not
scanned.

Scanned image is blurred
or partially colored.

Scan quality is bad.

Leave the unit for 4 or 5
hours.

ABCD - - - - -
- - - - - - - - - -
- - - - - - - - - -
- - - - - -

Scanner Error 49 is
displayed on LCD when
powered on.

Summary of Contents for KX-PS8000


































































































































































Search results

Summary of Contents for KX-PS8000

Reviews:

Related manuals for KX-PS8000

Brands by name

Popular brands

Panasonic KX-PS8000, Operating Instructions Manual

Search results

Summary of Contents for KX-PS8000

Reviews:

Related manuals for KX-PS8000

Brands by name

Popular brands