110
Care and Maintenance
■
Jam at D
Safety Caution:
B
The fuser is hot. To avoid personal injury, turn off the printer and wait 10
minutes (after opening the front door) for the fuser to cool before touching it.
Note:
B
First check the exit opening for media that has jammed and folded like an
accordion. It is especially difficult to see if the media is transparency film.
(Printing face down)
#
Open the front door.
$
Pull open the access door (above the plastic output tray); see
if the media is visible.
%
Turn the large green knob on the fuser counterclockwise.
&
Remove the media from inside the access door.
1
A
#
$
%
&
