![background image](http://html.mh-extra.com/html/panasonic/kx-p7500/kx-p7500_operating-instructions-manual_275285124.webp)
124
Care and Maintenance
The printed page appears dirty.
•
Clean the bottom face of the toner cartridge.
Do not open the shutter or touch the green drum
surface inside the cartridge.
•
Clean the internal black ribs of the printer.
(See
page 106
)
There are toner speckles.
•
Print a few more pages to see if the problem will
correct itself.
•
Clean the inside of the printer (see
page 105
and
page 108
).
•
Check the paper type and quality.
The printer drops letters.
•
Check the paper type and quality.
•
Check the printers environment.
•
Install a new toner cartridge.
•
Check the printer cable connections.
The printer drops letters in case of
printing from Dos mode in Windows 95.
•
Close the Status Display program.
“Check parallel Cable/Status Display
cannot monitor network printing” appears
in Status Display program.
•
Check the printer cable connections.
•
You cannot monitor the status of the printer which
is connected by network. Close the Status Display
program.
Dirty spots on the back side of paper
caused by fuser assy contamination.
•
Printing may accumulate toners on the pressure
roller of fuser assy. The accumulated toner may be
melted and transferred onto the back side of paper.
•
Select “FUSER CLEAN” in the JOB MENU.
•
“FUSER CLEAN” selection rotates the fuser about
10 seconds and prints one duplex page of a
specified pattern for fuser cleaning then stops.
Problem
Solution