148
Options
The following section explains how to install a PS SIMM (KX-PPSU4) on the KX-P7500 Series.
To install the PS SIMM, you will need to do the following:
•
Remove the printer cover from the right of the printer. See
page 136
.
•
Install a PS SIMM in the empty slot on the printer controller board.
•
Replace the printer cover. See
page 140
.
I
MPORTANT
•
To prevent static electricity damage to certain components (see
page 136
), touch a grounded
metal surface, such as the printer’s bare metal frame prior to touching the component.
•
PS SIMM (KX-PPSU4)
C
AUTION
•
Do not drop or bend the PS SIMM.
•
Do not touch the connector edge of the PS SIMM.
•
Protect the PS SIMM from static electricity by keeping it in its antistatic package until you are
ready to install it.
•
Avoid exposing the PS SIMM to direct sunlight, high temperatures, or humidity.
N
OTE
•
PS SIMM Contains the PowerPage®
Level 2J interpreter from Electronics for Imaging,
Inc.
Installing a PostScript SIMM
Kit contents