151
Options
The following section explains how to install a Network Card for Ethernet (KX-PNB2) on the KX-
P7500.
To install the network card you will need to perform the following:
•
Remove the printer cover from the right of the printer. See
page 136
.
•
Install the network card on the printer controller board.
•
Replace the printer cover. See
page 140
.
•
Configure the printer’s network setup. See Network card’s Quick Installation Guide included in the
KX-PNB2.
I
MPORTANT
•
To prevent static electricity damage to certain components (see
page 136
), touch a grounded
metal surface, such as the printer’s bare metal frame prior to touching the component.
•
Network Card for Ethernet (KX-PNB2)
C
AUTION
•
Do not drop or bend the network card.
•
Do not touch the connector of the network card.
•
Protect the network card from static electricity by keeping it in its anti-static package until you are
ready to install it.
•
Avoid exposing the network card to direct sunlight, high temperatures, or humidity.
Installing a Network Card for Ethernet
Kit contents
Network Card for Ethernet