176
For Macintosh User’s Guide
To install a PS SIMM, you will need to remove and replace the printer cover. For instructions, see
“Removing the printer cover” on page 172
.
To install a PS SIMM:
1
Unpack the PS SIMM.
Do not touch the connector edge on the PS SIMM.
2
Hold the PS SIMM with the connector edge pointing toward the connector
(CN9 or CN10) and position the notch as shown.
Insert the PS SIMM all the way into the connector at a 30
o
angle, and rotate
it to the left until it snaps into place.
Notch
Connector
edge
Notch