82
Using the Printer
JOB MENU
PAP.TYPE
NORMAL (Factory Default)
THICK
THIN
TRANSP.
The PAP.TYPE (PAPER TYPE) setting lets you specify the type of
print material installed in each tray.
Select NORMAL if the printer material is plain paper (16 to 28 lbs.).
Select THICK if the printer material is thick paper (over 28 lbs.),
high cotton paper, envelopes or labels.
Select THIN if the printer material is thin paper [60
g
/m
2
(16 lbs.)]
and the air is humid.
Select TRANSP. if the printer material is transparencies.
The displayed number of print material types may differ depending
on the “PAPER” and “TRAY” item settings.
MENU CLR
When you select MENU CLR (MENU CLEAR), the printer resets to
the factory default setting for each menu item.
MOPT
ON (Factory Default)
OFF
This MOPT (Memory Optimization Technology) setting makes the
printer process more data by optimizing the memory. If the value is
set to ON, the complex data can be processed.
DUP.TOP
5.0 (Factory Default)
0 to 9.9 mm (In increments of 0.1)
This item lets you select the top margin of the print materials when
the DUPLEX menu item is set to LONG (see
page 78
).
DUP.LEFT
5.0 (Factory Default)
0 to 9.9 mm (In increments of 0.1)
This item lets you select the left margin of the print materials when
the DUPLEX menu item is set to LONG (see
page 78
).
S-BIND
0 (Factory Default)
0 to 22 mm (In increments of 1)
This item lets you select the left margin for the binding when short
edge duplexing (see
page 78
).
Menu
Item
Values and Functions