Panasonic KX-FLB853FX Operating Instructions Manual Download Page 74

Page: 74 / 110

10. Help

10 Help

10.1 Error messages – Reports

If a problem occurs during fax transmission or reception, one of the following messages will be printed on
the sending and journal reports (page 31).

Message

Code

Cause & Solution

COMMUNICATION ERROR

40-42
46-72

A transmission or reception error occurred.
Try again or check with the other party.

43
44

A line problem occurred. Connect the
telephone line cord to a different jack and try
again.

An overseas transmission error occurred. Try
using the overseas mode (feature #411 on
page 67).

DOCUMENT JAMMED

-----

The document is jammed. Remove the
jammed document (page 89).

ERROR-NOT YOUR UNIT

54
59
70

A transmission or reception error occurred
because of a problem with the other party’s
fax machine. Check with the other party.

JUNK FAX PROH. REJECT

-----

The junk fax prohibitor feature of this unit
rejected fax reception.

MEMORY FULL

-----

The memory is full of received documents
due to a lack of recording paper or a recording
paper jam. Install paper (page 16) or clear the
jammed paper (page 85).

If you select the computer that will be used for
receiving a fax in feature #443 (page 71), and
feature #442 is set to

“

ALWAYS

”

(page 69),

check the connection between the computer
and the unit.

NO DOCUMENT / FAILED PICKUP

-----

The document was not fed into the unit
properly. Re-insert it and try again.

OTHER FAX NOT RESPONDING

-----

The other party’s fax machine is busy or has
run out of recording paper. Try again.

The other party’s fax machine rings too many
times. Send the fax manually (page 30).

The other party’s machine is not a fax
machine. Check with the other party.

The number you dialled is not in service.

PRESSED THE STOP KEY

-----

L {

STOP

}

was pressed and fax communication

was cancelled.

THE COVER WAS OPENED

-----

The top cover was opened. Close it and try
again.

-----

Fax transmission or reception was
successful.

FLB853FX-PFQX2355ZA-en.book Page 72 Friday, January 13, 2006 2:25 PM

Summary of Contents for KX-FLB853FX















































































































Search results

Summary of Contents for KX-FLB853FX

Reviews:

Related manuals for KX-FLB853FX

Brands by name

Popular brands

Panasonic KX-FLB853FX, Operating Instructions Manual

Search results

Summary of Contents for KX-FLB853FX

Reviews:

Related manuals for KX-FLB853FX

Brands by name

Popular brands