Panasonic KX-FLB853FX Operating Instructions Manual Download Page 19

Page: 19 / 110

1. Introduction and Installation

Before loading a stack of paper, fan the
paper to prevent paper jams.

Load the paper, print-side up (

Important:

Push and lock the plate (

) in the

paper input tray, if it is lifted.

Adjust the width to the size of the recording
paper by sliding the front side of the guide
(

Make sure that the recording paper is
under the paper limit mark (

), and the

paper should not be over the snubbers
(

Close the paper input tray.

Note:

If the paper is not loaded correctly, re-adjust
the paper guides, or the paper may jam.

If the paper input tray does not close, the
plate in the paper input tray may be lifted.
Push the paper and check that the paper is
flat in the paper input tray.

To pull the paper input tray completely out

Pull the paper input tray (

) until it clicks into

place, then pull it completely out, lifting the front
part of the tray.

To insert the paper input tray

Insert the paper input tray (

) to the unit,

lifting the front part of the tray. Then push it
completely into the unit.

FLB853FX-PFQX2355ZA-en.book Page 17 Friday, January 13, 2006 2:25 PM

Summary of Contents for KX-FLB853FX















































































































Search results

Summary of Contents for KX-FLB853FX

Reviews:

Related manuals for KX-FLB853FX

Brands by name

Popular brands

Panasonic KX-FLB853FX, Operating Instructions Manual

Search results

Summary of Contents for KX-FLB853FX

Reviews:

Related manuals for KX-FLB853FX

Brands by name

Popular brands