55
1.3.3 Error Codes
◇
Basic procedure errors
Error code
Error name
Explanation
40H
Bcc error
・
A Bcc error occurred in the command data.
41H
Format error
・
A command message was sent that does not fit the transmission
format.
42H
No support error
・
A command was sent that is not supported.
43H
Procedure error
・
Delimiter with multiple frames was sent.
・
The response shall be multiple frames.
◇
Application error
Error code
Error name
Explanation
60H
Parameter error
・
The data code is not “D”.
61H
Data error
・
Word No. is specified without decimal.(0000F etc.)
・
The starting word No. is bigger than the ending word No.
・
Writing data has a code that is not hexadecimal.
62H
Registration error
・
Too many registrations have been entered (more than 17).
・
“MD” command was sent when some registration has been exist.
・
“MG” command was sent when registration has not been
entered.
◇
Self-diagnostic error
Error code
Error name
Explanation
45H
Operation error
・
At “WD” command, writing data is exceeded the range of data
register.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]