3.1.2 Flow to Introduce “1:1 topology with repeaters”
Set Unit No., communication channel and MODE switches.
With 1:1 topology with repeaters, MODE switch No.1 should be set to
ON.
Reference:
<3.2 Initial setting of wireless unit>
Register slave at the master. All slaves’ registration is necessary.
Reference:
<4. Register slave>
Set master setup and set routing setting of slaves and terminal
equipment. Configurator KR (setting tool) is necessary to set.
Reference:
<5.3.2 Routing setting>
Set as the actual running conditions.
Reference:
<5.3.3 Operation during running>
Initial setting of
master and slave
Slave registration
Routing setting
Operation during
running
3.1.3 Flow to introduce “1:N topology”
Set Unit No., communication channel and MODE switches.
With 1:N topology, MODE switch No.1 should be set to ON.
Reference:
<3.2 Initial setting of wireless unit>
Register slave at the master. All slaves’ registration is necessary.
Reference:
<4. Register slave>
Set master setup and set routing setting of slaves and terminal
equipment. Configurator KR (setting tool) is necessary to set.
Reference:
<5.4.2 Routing setting>
Set as the actual running conditions.
Reference:
<5.4.3 Operation during running>
Initial setting of
master and slave
Operation during
running
Routing setting
Slave registration
3-3
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: [email protected]
