Input Unit No. existed in the routing view.
When the below dialog is displayed, click ‘OK’.
Below dialog is displayed during data communication.
After completing the communication correctly, it displays slave’s model No., Software version,
erial No., Name and field intensity level.
S
6.3.4 Communication test
You can check the communication conditions from master to objecteive slave including repeaters
beforehand. You can know an approximate return period to communicate, it can be used as
reference in order to set timeout period at upper level.
(1) Select “file” -> “Tranfer From Main Unit” in menu.
Keep the display of slave registration list, routing setting in main window.
Set operating mode swithes of master and slave to <SET> or <RUN> and turn the power
supply on.
6-11
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.ctiautomation.net - Email: [email protected]
