Panasonic HDC-TM350 Operating Instructions Manual Download Page 104

Page: 104 / 151

103

VQT2H62

Connect the AC adaptor (supplied with DVD burner) to the DVD burner.

≥

You cannot supply power to the DVD burner from this unit.

Connect this unit to the AC adaptor and change the mode to

Connect this unit to the DVD burner with the Mini AB USB Connection
Cable (supplied with DVD burner).

Mini AB USB Connection Cable (supplied with DVD burner)

DVD burner (optional)

≥

Insert the plugs as far as they will go.

Insert the disc in the DVD burner.

≥

Insert the DVD disc with the recording side down when using the DVD burner.

Touch the desired item.

≥

[BURN DISC]: Refer to page 104 for how to copy discs.

≥

[PLAY DISC]: Refer to page 107 for how to play back the copied discs.

To terminate the connection with the DVD burner

Touch [EXIT].

≥

Disconnect the Mini AB USB Connection Cable from this unit.

Summary of Contents for HDC-TM350
























































































































































Search results

Summary of Contents for HDC-TM350

Reviews:

Related manuals for HDC-TM350

Brands by name

Popular brands

Panasonic HDC-TM350, Operating Instructions Manual

Search results

Summary of Contents for HDC-TM350

Reviews:

Related manuals for HDC-TM350

Brands by name

Popular brands