Panasonic HDC-TM350 Operating Instructions Manual Download Page 82

Page: 82 / 151

VQT2H62

Playback

Playback

Still picture playback

Change the mode to

Touch the play mode select icon

to select desired media to be

played back.

≥

Touch [PICTURE/SD CARD] to play back the
SD card.
Touch [PICTURE/Built-in Memory] to play back
the built-in memory.

Touch the still picture to be
played back.

The selected still picture is played back on the
full screen, and the operation icon is
automatically displayed on the screen.

≥

Next (previous) page can be displayed by
touching /

≥

Rotate the mode dial while at the same
time pressing in the lock release button

if changing from OFF to another mode.

≥

Align with the mark

Summary of Contents for HDC-TM350
























































































































































Search results

Summary of Contents for HDC-TM350

Reviews:

Related manuals for HDC-TM350

Brands by name

Popular brands

Panasonic HDC-TM350, Operating Instructions Manual

Search results

Summary of Contents for HDC-TM350

Reviews:

Related manuals for HDC-TM350

Brands by name

Popular brands